When you are looking to stop using an old doorbell or want to invest in a new ringing mechanism, it’s important to understand the electrical logistics of the project.
You have to think about safety, where the wiring is going to go, and how to make sure the setup is in line with what the entrance requires.
This has to be a part of your planning phase.
One step you will need to think about is how to turn off the power to a doorbell.
To turn off the power to a doorbell, go to the main circuit breaker, look at the switch connected to the entrance/doorbell, and toggle it to the off position. It’s recommended to place wire caps on the exposed wiring and tuck it behind the new doorbell.
You will want to do a comprehensive job to make sure the doorbell does not become a safety hazard later.
Here is a step-by-step look at what you need to do as you learn how to turn off the power to a doorbell.
Table of Contents
Best Ring Doorbell (EDITOR’S CHOICE)
No products found.
Steps On How To Turn Off Power To Doorbell
1. Go To The Main Circuit Breaker
To shut off power to a doorbell, you will need to go to the main circuit breaker.
Each property is going to have a central circuit breaker that has the various switches in one place.
This is designed to make it easy and more controllable when turning the power on or off to specific parts of the property.
In most cases, the circuit breaker is going to be set up inside the property.
You will want to go to the main circuit breaker and look for a specific switch that is connected to the entrance and doorbell. This is the switch that is responsible for pushing power to that part of the property.
It should be in the “On” position when you look at it.
2. Toggle Switch To The “Off” Position
Now, you are going to toggle that switch to the “off” position.
This will immediately turn off the power running to the doorbell wiring.
You will want to make sure it is to the other side and does not budge unless you push it back to the on position.
This is a sign the power is not going to the doorbell any longer.
You can always go back to the doorbell to test whether or not the power has stopped running to it.
3. Install Wire Caps On Exposed Doorbell Wiring
As you shut off the power to the doorbell, you are going to want to also think about the exposed wiring that is in place.
The wiring should not be left out in the open.
This is dangerous and a fire risk.
What you are going to do is install wire caps on the exposed ends of the doorbell wiring. This is assuming you have taken out the existing wiring.
If you have not, you can skip this and the next step.
However, if you are going to leave the doorbell wiring exposed, you should install wire caps on the tips.
This will act as a safety net to make sure the wiring does not spark.
4. Push Wiring Back Into The Socket
The last step is to make sure you push the doorbell wiring out of the way.
You can do this in a few ways but the easiest option is to simply push it back into the socket where it is.
The reason for doing this is to ensure the wiring is not sticking out. By pushing it in, you are also going to have access to the doorbell wiring whenever you want to turn the power back on.
Once again, this is assuming you are taking out the old doorbell.
Final Thoughts
As you go through these steps on how to turn off the power to a doorbell, you will get the results you desire.
To turn off power to a doorbell, go to the main circuit breaker, find the switch connected to the doorbell, and toggle it to the “off” position. This will shut off power going to the doorbell. Next, install wire caps on the tips of the exposed wiring and tuck it out of the way.
This will make sure you have a safe setup that will work as you want it to.
Do not leave the doorbell wiring in a state that is out in the open. This is dangerous and not what you should be doing.
Take your time as you are thinking about the power that is running to the doorbell. It will make a real difference.
Read More On Doors: