A dripping Delta faucet is not something you are going to want to deal with.
It is often troubling to face issues with a newly-installed faucet. You assume it’s going to be a perfect fit and will work as intended from day one.
You have to be patient and make sure you look for a solution that works. This includes understanding why the new Delta faucet drips.
A new Delta Faucet might drip if it is improperly installed or the cartridge needs to be replaced due to underlying damage. To fix the issue, cut the water supply, remove the front of the faucet, and inspect the cartridge. Replace it and tighten everything.
For the most part, a Delta faucet that has just been installed shouldn’t give issues. It is only when the faucet wasn’t tightened that these issues arise.
In some situations, you will have to deal with a damaged cartridge. This happens when the faucet is first installed as the cartridge can move around or break inside.
This article will explain how to fix a new Delta faucet that is dripping.
Best Shower Faucet (EDITOR’S CHOICE)
No products found.
Tips To Fix New Delta Faucet That Drips
1. Cut The Water Supply To Faucet
If a Delta faucet is dripping, you are going to need to cut the water supply immediately.
If the water continues to run to the faucet, it will continue to drip. Your goal has to be to shut down the water supply and then see what’s going on.
Some faucets will have a valve running underneath that can be turned off. If not, you will want to turn off the main water supply to this part of the property.
Do not attempt to remove the Delta faucet without cutting off the water supply.
This can lead to a major leak inside the room and it will also cause damage to the internal components of the faucet.
Be careful and methodical while managing a situation such as this to do things properly.
2. Remove The Front Of The Faucet
When a Delta faucet drips, you will want to take off the front of the faucet.
This is where the cartridge is.
Your goal is to take off the front of the faucet and make sure it comes off cleanly. It should spin off when you begin to turn it.
Once again, be careful while doing this, and make sure you are using something to maintain grip while turning the front of the faucet.
It will come off after you give it a proper spin.
3. Remove And Replace The Cartridge
Now, you are going to take a look at the cartridge inside the Delta faucet.
The idea is to see whether or not the cartridge is in good condition. This includes its shape and how it is set up inside the faucet.
If it is bent or damaged then that is the root cause of the leaking Delta faucet.
In a situation such as this, you will want to find a compatible alternative and replace the faucet cartridge as soon as possible.
If not, you will want to make sure it is seated inside the faucet properly and then close everything back to how it was.
4. Test The Faucet
The last step is to test the faucet when you are sure everything has been tightened.
Sometimes, the real issue has to do with how loose the new Delta faucet is. If you have just installed it then it might be a loose part that is not letting the water stay inside the faucet.
Be focused when it comes to testing the faucet and make sure it is not dripping any longer.
If it was the cartridge, the problem should be fixed as soon as you replace it with a new one.
If it was a loose component then tightening everything will go a long way in getting the job done.
Look at these steps if a new Delta faucet drips.
If a new Delta faucet drips, this is often caused by an improperly installed fixture or a damaged cartridge. To fix the issue, start by cutting off the water supply, removing the front of the faucet, and replacing the cartridge.
This should help get rid of the dripping as long as you tighten everything else.
Delta faucets are known for being rugged and built to last. This means it is the installation that is usually the issue including the cartridge. Just replace it and you will be good to go.
This is where your focus has to be when fixing a dripping Delta faucet.
Read More On Bathrooms: