If the shower handle set has a screw stuck, you will get frustrated quickly.
It’s challenging to deal with a screw that has become stripped or is not turning as required. This can leave you in a difficult situation.
To avoid damaging the surrounding shower components, it’s important to learn how to remove a stuck shower handle screw.
To remove a stuck shower handle screw, start by locating the screw. Now, tap the top of the screw using a hammer. While doing this, wedge a screwdriver to one side of the screw. This will allow you to pull the screw out with gentle force. If necessary, apply lubricant to loosen the screw beforehand.
In most cases, this is all you are going to have to do to get rid of a stuck shower handle screw.
To learn more about how to remove a stuck shower handle screw, this guide will teach you what to do during each step.
Table of Contents
Best Shower Handle (EDITOR’S CHOICE)
No products found.
Steps On How To Remove A Stuck Shower Handle Screw
1. Locate the Stuck Screw
When figuring out how to remove a stuck shower handle, you will have to start with the basics. This includes collecting all of the relevant materials (i.e. hammer, lubricant, screwdriver).
You will then want to find out where the screw is.
Inspect the screw during this process to understand why it’s not turning. In some cases, the screw will need a bit of lubrication and then it’s going to start turning. Give this a shot before trying something more forceful.
If it is still not turning then the screw has lightly been stripped down due to natural wear and tear. This does happen all the time and is quite common.
Keeping this in mind, you will want to inspect the screw further and then move on to the next step in the process.
2. Hit Screw With A Hammer (Gently)
Take a hammer and start tapping the top of the stuck screw.
You will want to make sure the screw is starting to move in its spot. It won’t take a lot of force, so don’t wind up when hitting down on the screw.
Just apply a bit of force and make sure to hit the same spot continuously. This will help loosen the screw from that point allowing you to pull out the screw.
Continue to pull while doing this to see if it budges. If not, you will have to kick things up a gear.
3. Wedge Screwdriver Into The Gap
When a shower handle won’t come off, you will often have to wedge a screwdriver into the gap between the screw and where it’s inserted.
This is going to take a bit of time but you can use the hammer to hit the screwdriver into that specific gap.
If you do this nicely, it will allow the screwdriver to go into that gap immediately.
Too many people don’t take the time to do this and that leads them to pull on a stuck shower handle screw that refuses to come out even with force.
By sticking the screwdriver into that gap, you will loosen the screw.
4. Pull Lightly
The last step is to start pulling on the screw with your hand.
You will want to keep pulling while pushing the screwdriver deeper into the gap. This is going to take a bit of force but not a lot.
Don’t try yanking down. If you pull straight, it will be easier to take the stuck shower handle screw out.
It’s important to take your time during this process. This applies to any part of the process when it comes to removing a stuck shower handle screw at home.
Final Thoughts
These are the tips on how to remove a stuck shower handle screw.
If you want to remove a stuck shower handle screw, start by spotting where the screw is. If it is stripped, you will have to take a hammer and gently tap the top of the screw. This will loosen it before you stick a screwdriver into the newly created gap. Once the screwdriver is in, pull with a bit of force to get the screw to come out.
This should only take a few minutes to complete if done properly.
If it still doesn’t come out, apply a bit of lubrication to the screw and try again. This will help make it easier to pull on the screw and get it to come out.
Read More On Bathrooms: