When you are brushing the toilet and cleaning everything, it’s common to use a toilet wand for the task.
It’s effective, specialized for this type of fixture, and will work instantly.
However, this is assuming everything works out as intended. There are times when things don’t go as planned and you have a loose toilet wand head. This is what leads to a situation where you accidentally flushed the toilet wand head.
If you accidentally flushed the toilet wand head, start by turning off the water using the valve. Now, attempt to use a hook to push into the toilet hole. In most cases, the toilet wand head won’t go deep and you can hook it out. If it did go deep, empty the toilet tank and use a drain snake to go deeper.
It’s highly recommended to not use the drain snake immediately.
This is going to prolong the process when you might not need to go through so many steps.
Keep it simple at first and just look to take something that has a hook to push into the toilet hole. This will allow you to access the toilet trap and pull the toilet wand head out.
This guide will explain more on what to do if you accidentally flushed the toilet wand head
Best Toilet Snake (EDITOR’S CHOICE)
No products found.
How To Remove A Toilet Wand Head Flushed Down The Toilet
1. Start By Turning Off The Water To Your Toilet
If a toilet brush head is flushed down the toilet, you will need to turn off the water to gain access to the toilet hole without getting sprayed.
This is an important step and one you should always do before working on removing items from a toilet.
How are you going to turn off the water in the toilet?
You are going to find the shutoff valve, which will be located on the pipe that is going into the toilet. You should see this on the side or behind the toilet.
Turn this valve until the water isn’t going in any longer.
2. Use Hook For Toilet Hole
The first step is to see how far the toilet wand head has gone into the toilet drain.
In the best-case scenario, you are going to have a toilet brush head in the toilet that is within the trap.
This means you should easily have access through the toilet hole without needing to empty the toilet tank or anything else.
Just take something that has a hook and will fit through the hole in the toilet. Once you have the hook, push it into the toilet hole until you feel a snag. This is when you will hook onto the toilet wand head.
As soon as you have a good hold, yank it out of the hole.
3. Use a Drain Snake
Let’s assume this does not work.
The next and best option will be to use a drain snake.
The drain snake will go deeper than a hook or plunger. Your goal here is to empty the toilet tank and ensure there is no water in there.
Once you do this, you will push the drain snake in and begin turning. This will allow the drain snake to hook onto the toilet wand head as soon as you get to it in the drain.
As soon as you are hooked onto it, pull it out using the drain snake.
4. Check For Debris
Unlike other items that get stuck in the toilet drain, you need to be extra careful with a toilet wand head.
This is due to the debris that comes off of the head.
If the toilet brush head broke into pieces, this is going to create additional issues. This is why when you pull it out, inspect the toilet brush head to see if it’s intact.
If not, you will need to use the drain snake again to recover the remaining parts of the brush head.
Otherwise, the toilet may remain clogged until the problem is resolved.
Final Thoughts
I accidentally flushed the toilet wand head!
If you accidentally flushed the toilet wand head, it’s best to turn off the water going to the toilet first. Now, use a hook to push into the toilet hole and yank the toilet wand head out. If this doesn’t work, empty the water tank and use a drain snake to go deeper.
These are the two options that will work well when something as big as a toilet brush head gets stuck in the toilet.
Remember, take your time with this process and ensure you are using the right tools. This includes a quality drain snake when the hook doesn’t work.
Read More On Bathrooms: