Cleaning wood is easier said than done.
You will want to go through all of the preparatory steps to make sure the wood is ready to be cleaned. Otherwise, it’s common for the wood to get discolored or to lose its shape because you were not careful enough.
To ensure this does not happen, you will want to learn more about cleaning wood with bleach and water.
To start cleaning wood with bleach and water, mix a cup of bleach with a gallon of warm water. Apply the solution onto the wooden surface, let it sit for five minutes, and then wipe with a clean cloth. Once done, air-dry the wood.
This is a simple process and will work wonders when it comes to cleaning wood.
Other cleaning agents are not as effective as bleach with water. It will clean the wood easily and also bring it back to how it was before the stains or odors appeared.
This guide will go into greater detail to pinpoint what’s required when cleaning wood with bleach and water.
Table of Contents
Best Bleach (EDITOR’S CHOICE)
No products found.
Steps For Cleaning Wood With Bleach And Water
1. Wipe The Wood With A Clean Cloth
Using bleach on wood is a good idea.
You can clean wood with bleach and water while seeing exceptional results. However, before getting started, you will need to take the time to prep the surface.
How are you going to do this?
The idea is to take a clean cloth and wipe the wooden surface from one end to the other. This will ensure that any debris and/or residue that is settled on top of the surface is gone before the bleach settles in.
This is a good way to see better results and make sure the bleach gets to do its job properly.
Just this simple step will improve the results instantly.

2. Mix Bleach And Water
Does bleach damage wood?
Bleach does not damage wood and is commonly used to clean different types of surfaces including wood. When mixed with water, it can offer substantial results and is the ultimate cleaning agent.
To get started with this, you will want to mix a cup of bleach with a gallon of water. Make sure it has been thoroughly mixed.
When you are satisfied, it is time to begin using the mixture on the wooden surface.
3. Apply The Mixture To The Wooden Surface
This is the most important step in the process.
You will want to ensure that the mixture that is being applied to the wood covers everything. Don’t leave spots as that is going to ruin the finishing and might not clean the surface as well as you want it to.
Be careful and make sure to gently apply the mixture to all parts of the wooden surface.
You will have a few options available to you.
The best choice is to take a sponge and use that to spread the mixture. This will ensure it offers good coverage and you also get to rub it into the surface for better results.
If you don’t want to do this, you can always move forward with pouring the mixture directly onto the surface.

4. Wipe Surface With A Clean Cloth
You will now want to start wiping the surface using a clean cloth.
Make sure the cloth is clean as you don’t want additional debris or residue to settle onto the surface.
With a clean cloth, you can begin wiping the surface using a circular motion. This will ensure streaking doesn’t take place and the results are on par with what you need.
Take your time doing this and be vigorous with your wiping.
This will get all of the pesky stains out of the way and ensure the wood looks as clean as you want it to.
5. Air-Dry The Wood
The last step is to air-dry the wood.
You are going to want to let the wood settle and that is only going to happen through the air-drying process.
Don’t attempt to expedite the process with a hairdryer.
This is not good for the wood and could cause it to start breaking or cracking. Instead of letting this happen, wipe the surface with the cloth, and then let it air-dry.
Final Thoughts
These are the most important tips to focus on when it comes to cleaning wood with bleach and water.
To start cleaning wood with bleach and water, start by mixing a cup of bleach with a gallon of water. Now, apply the mixture onto the wooden surface using a sponge, wipe with a clean cloth, and then let it air-dry.
This will make sure the wooden surface is as clean as you wish it to be.
Read More On Cleaning: