Dressers can start to lose their shape with time and most people will notice a certain amount of unevenness.
This can lead you to wonder why the dresser is sagging in the middle.
Dressers can start sagging in the middle due to excess weight on the top or when one of the joints has broken. The first step is to remove all of the weight from the dresser and add a support beam or part running down the middle. This can be set at the bottom of the dresser. It will ensure the dresser doesn’t break.
In most cases, you might have to replace the dresser if it is sagging from the middle. The dresser might be past the point of no return, which means it is going to eventually break.
This article will explain why a dresser is sagging in the middle and how to fix it.
Table of Contents
Best Leveling Tool For Walls (EDITOR’S CHOICE)
No products found.
How To Fix a Sagging Dresser
1. Remove Everything From The Top and Drawers
A sagging dresser top can often be a sign there’s too much weight on it.
Each dresser has a maximum weight capacity that it can handle. This is similar to anything that is standing up whether it’s your bed, house, or anything else.
You have to know what the maximum weight capacity is before using the dresser. If it is already starting to bend from the middle then that might be a sign you have overloaded it!
The first step to focus on will be to remove the weight off of the dresser.
This will let you find out whether or not it is the weight that is causing the dresser to lose its shape. The same can happen if too much weight is put on one side of the dresser.
You have to get rid of items that are too heavy and put a lot of stress on the dresser over time. This is dangerous and might cause everything to break.
2. Check the Joints
If the dresser drawers are not lining up or the dresser has sagged from the middle, you might have to look at the joints.
Each dresser is going to have joint pieces that are attached to the angle points. This includes both at the bottom and the top.
Check if those joint pieces are still intact and not losing their shape.
If they are losing their shape then that is a real point of concern. You will have to immediately repair or replace the joint or it is going to tumble down.
3. Add a Thick Piece of Wood Underneath the Center
If the joints are okay and the dresser is still bending in the middle, you will have to support that part of the dresser using a stable material (i.e. wood piece).
This wood is going to go right down the middle of the dresser to support both sides while eliminating the sagging.
You can set the wood near the bottom of the dresser to offer additional support. For the most part, this should prop up the dresser and make sure it does not fall.
You can add additional pieces into the drawers if that is something you wish to do but it is likely unnecessary.
4. Test the Dresser with Lighter Weight
The last step is to test the dresser to make sure it is working the way you want it to.
This means placing a bit of weight in the drawers to see how the dresser responds. If it is not bending any longer then you can continue to add weight to the dresser as you deem fit.
However, you will still want to stay well within the limits to make sure the joints remain intact.
These are simple tips that are going to go a long way when it comes to testing how well the dresser functions.
These are the steps to focus on with a dresser sagging in the middle.
If a dresser is sagging in the middle, the issue likely has to do with too much weight on the top or in the drawers. It can also have to do with one of the joint pieces getting damaged causing the dresser to lose its shape. To fix the issue, you will want to remove excess weight, replace the joint pieces, and/or add a wood piece underneath the dresser to stabilize it.
These are simple adjustments that will ensure the dresser does not fall.
Always test the dresser and make sure it is not going to fall especially with children or pets around. You should be screwing the dresser to the wall to prevent this type of accident.
Read More On Bedrooms: