Bathtubs are large fixtures and will take up quite a bit of space in the bathtub.
However, it is even more noticeable when you are looking to bring a bathtub into the bathroom. This is when you are going to realize it will take up quite a bit of space and it’s something you should be prepared for.
This includes learning how to get a bathtub into a bathroom the right way.
To get a bathtub into a bathroom, start by measuring the doorway to see if the bathtub can fit. Next, set a sheet on the ground, use lifting straps to pick up the bathtub, and tilt it to the side to bring it through the doorway.
The average bathtub cannot be taken into the bathroom in a straight line. You will need to tilt it to the side and then slide it in.
This is the only way to make sure you are getting the bathtub through the bathroom door without damaging anything.
This article will take a look at how to get a bathtub into a bathroom the right way.
Table of Contents
Best Mat For Bathtub (EDITOR’S CHOICE)
No products found.
Steps On How To Get A Bathtub Into A Bathroom
1. Measure The Tub And Doorway
You will want to take a detailed look at the bathtub.
This includes measuring its length and width to get a better read on how you are going to fit it through a bathroom doorway.
In general, you will also want to take measurements of the doorway too.
This is ideal because it will let you plan how you are going to hold the bathtub while pushing it through the doorway. You don’t want to make these calculations while you are holding the weight of a bathtub in your hands.
It is a lot more stressful if you do it like that and it can cause damage to both the tub and the door.
2. Set A Sheet On The Floor
With the measurements in hand, you are now going to want to prepare the bathroom floor and the area in front of it.
To do this, you are going to want to lay a bedsheet on the floor.
The reason for doing this is to make sure you are protecting the floor. This will allow you to slide the bathtub softly if you need to do so when you get to the door.
This is an additional option you are going to want to keep open and all it takes is one bedsheet to make it happen.
3. Use Lifting Straps To Lift The Tub
Now, it is time to start thinking about how you are going to lift the bathtub as you aim to push it through.
You are going to want to use lifting straps.
The reason is to make sure you are getting the tub through the doorway and into place before it damages anything.
The goal is to make sure you are also not having to worry about the weight of the bathtub when you are coordinating how it is going to get through.
It is best to make sure you are using lifting straps as that is how you are going to get appropriate results.
4. Lift The Tub On Its Side
You are now going to lift the tub on its side.
The goal here is to make sure you are picking the tub carefully and ensuring it is being put in a spot that is safe.
This will take a bit of time to do but you are going to want to ensure it is done the right way.
In most cases, lifting it the way you would install it is not going to work. It will be too wide and won’t fit through the doorway.
However, you can tilt it to its side and take it in a straight line using this method. It will fit through as this side is going to be thinner.
These are the best tips on how to get a bathtub into a bathroom.
To get a bathtub into a bathroom, start by measuring the doorway and the tub. Next, set a bedsheet on the floor and use lifting straps to pick up the tub. Once ready, tilt the tub on its side and take it with the thinner side facing up.
This is a simple lifting technique that is going to make sure your bathtub goes through the door without damaging anything.
If you are patient enough, you are going to like the results that you end up seeing as soon as the process concludes.
Read More On Bathrooms: