Tiling installations require attention to detail, precision, and the willingness to inspect everything throughout the process.
If this is a DIY project, it has to be handled with care. Slight mistakes will stand out when everything is said and done.
Keeping this in mind, it is still common for tiling mistakes to be made. Once you spot those errors, you will want to learn how to hide tiling mistakes.
To hide tiling mistakes, place painter’s tape on both sides of the imperfect spot and fill it with matching grout. This will help hide the tiling error and make sure it is difficult to pinpoint from afar.
This happens more often than you think, which is why matching grout is your best friend.
In the worst-case scenario, you should strip the tile off and re-install that specific part. In most situations, you will not have to go down that path and matching grout will suffice.
This guide will show you how to hide tiling mistakes and what to look for as you do so.
Table of Contents
Best Cleaner For Backsplash (EDITOR’S CHOICE)
- Grout cleaner - Breaks down the toughest grout stains
- Tile cleaner - Removes dirt build up and stains
- Works on - Dirt buildup, stains, soap scum and hard water stains
Last update on 2024-02-28 / Affiliate links / Images from Amazon Product Advertising API
Steps On How To Hide Tiling Mistakes
1. Inspect The Imperfections
To hide tiling errors, it’s important to know what the root cause is.
Sometimes, a person might assume there are tiling mistakes when it is more to do with the lighting creating an illusion. This is common with countertop lighting due to how it hits the tiling.
Make sure this is not the case by turning off the lighting and also inspecting the tiling from different angles. You will want to make sure it is something that has to be worked on.
You should take the time to go through these details to the best of your ability.
It’s also important to figure out how you are going to fix a bad tiling job. Some will want to use grout and others will need to take off the uneven tiles. This comes down to the situation in front of you and what’s required.
For the most part, matching grout should get the job done.
2. Place Painter’s Tape On Both Sides
When it comes to signs of a bad tiling job, it is often going to be around uneven tiling and how everything sits.
This is why matching grout is useful.
Will grout hide uneven tiles?
Yes, grout will hide uneven tiles and can be applied without too much of a fuss. To do this, you are going to apply painter’s tape on both sides and make sure only the spot where the grout is needed is uncovered.
This will ensure you don’t leave a mess behind.
3. Fill With Matching Grout
With the painter’s tape in place, it is now time to get started on filling the area with matching grout.
Make sure it is matching or it will look odd once everything dries!
The goal here is to squeeze as much of the matching grout into that spot as possible. This is going to help cover the tiling mistake that is in front of you.
Once it dries, you are going to be good to go and it will look far better.
It’s important to spread the grout once it has been squeezed into the gap. This can be done with your finger if necessary.
4. Clean The Tiles
The last step and one a lot of people don’t think about is cleaning the tiles.
You should always clean the tiles.
The reason for doing this is to make sure excess grout is not left behind and the rest of the tiles look similar to the one you have just worked on.
If they are unclean, this might make the tile stand out and that is not a good thing.
Be patient and clean each tile using a strong tile cleaner. This will give it the shine that you need.
These tips will make sure you figure out how to hide tiling mistakes properly.
To hide tiling mistakes, start by inspecting the surface for uneven spots. Next, apply painter’s tape on both sides of the uneven spot and fill it with matching grout. Once done, clean the surface.
This should hide tiling imperfections within minutes.
Grout is always going to help you in these situations as long as the tiles are in good shape. This is why you should keep matching grout on-hand to begin working on the tiling mistakes.
It does not take a long time to do this as long as you have the right type of grout ready to go.
Remember, after you are done applying the matching grout to the tiling, it’s also important to clean the surface. This is the only way you are going to get the type of finish you are after.
Read More On Backsplashes: