When it comes to LED lights all of them need to work in sync.
If not, the results can be displeasing and something you are going to want to fix as soon as possible.
When the LED lights are set up, you will want to make sure they’re working properly. The first thing you will wonder is, why are half of my LED lights not working?
If half of the LED lights are not working, the main cause is due to physical damage to the strip (i.e. bending, fraying), static electricity, or improper solder joints. To fix the issue, inspect the strip for damage, connect to a different power connector, and tape weakened portions of the strip.
It’s important to remember that some LED strip lights are difficult to repair. This depends on the amount of damage that has been done.
You don’t want a situation where the damage is unimaginable.
This article is going to take a look at how to fix LED lights that are half working.
Table of Contents
Best LED Lights (EDITOR’S CHOICE)
No products found.
Tips On How To Fix LED Lights That Are Half Working
1. Inspect For Damage
If half of the LED lights suddenly stop working, the main issue might have to do with physical damage to the strip.
This happens often and it is due to how LED strip lights are set up.
The strip is long and it can be impacted based on where it is installed.
A common issue people report has to do with bending and/or fraying. If it is bending, it is best to straighten the LED strip light immediately. Otherwise, it might tear and that will make it difficult to repair.
If the LED strip light is fraying, it is best to look at figuring out what can be done to seal that part of the light.
It is the only way to make sure you don’t have a situation where the remaining half dies out too.
2. Change The Power Source
If half of the LED lights are not working, you will want to take a look at the power source.
The power source can become compromised.
This includes the connector or the outlet where you have set up the LED strip lights. It is best to take the time to check both the outlet and the connector for damage.
In a situation such as this where the connector is fine, it’s time to change the outlet. This means connecting the LED strip lights to another power source to see if that helps.
In a lot of cases, this will be enough to get the job done.
3. Tape Damaged Parts Of The Strip
When some of the LED lights are not working, you will have to focus on correcting any damages that are noticeable with the strip.
For example, if you are noticing fraying, it’s time to remedy the problem as soon as possible.
How do you do this?
You are going to take the electrical tape and use this to hold the fraying part together. This might help it rekindle the connection and pass energy through to the rest of the strip that has died.
Be careful while doing this and apply the tape only on the parts that need it.
4. Let LED Lights Settle By Unplugging Them
The last step is to focus on resettling the LED strip lights.
What does this mean?
The idea is to unplug the LED lights and let them settle for approximately 10-15 minutes. This will drain the electricity out of the lights and then will help reconnect everything once you plug it back in.
The waiting period is important, so don’t rush the process.
It is similar to resetting the lights.
In some situations, this might be all you are going to need to get the rest of the LED lights working.
Final Thoughts
Why are half of my LED lights not working?
If half of the LED lights are not working, the main causes can include bending, fraying, or a weak connection. To fix the issue, unplug the LED lights, inspect the strip for physical damage, change the power source, and/or use electrical tape to seal the damaged part of the strip.
This will take a bit of time to go through but it is possible to fix LED strip lights when they are half working.
Do not give up.
Sometimes, all you are going to have to do is change the power source and that will help push electricity through to the other half of the strip.
Continue to work through these steps until you get the solution that you are on the lookout for.
Read More About Lights: