When you are using a Swiffer around the room, it’s common to start noticing small streaks and/or signs of residue.
You will want to figure out what to do when this occurs.
While it is not going to happen often, it is still something you will want to nip in the bud as soon as you can.
As a result, it becomes important to learn how to remove Swiffer residue safely.
To remove Swiffer residue, start by wiping the surface using a dry cloth. Next, spray a strong glass cleaner on the surface, wait 2-3 minutes, scrub the area using a sponge, and then wipe it again.
This will ensure the Swiffer residue is gone before it leaves a lasting mark.
You will want to be quick when it comes to getting rid of Swiffer residue because it will look odd and stand out. The faster you act, the easier it is to make sure the surface looks the way it needs to.
This article is going to teach you how to remove Swiffer residue the right way.
Table of Contents
Best Swiffer (EDITOR’S CHOICE)
No products found.
Steps On How To Remove Swiffer Residue
1. Wipe With A Dry Cloth
When looking to remove Swiffer residue from the floor, you will want to start with the basics.
The first step is to take a dry, clean cloth and begin to wipe over the residue. The goal is to make sure any excess debris is taken out of the equation as soon as possible.
You do not want this to get in the way of the cleaning agent you are going to use on the surface later.
In general, the surface should be dry.
However, any issues that are left can be managed with the help of a clean cloth. Continue to wipe across the residue and make sure to get all of it.
In some cases, the residue will start to come off. This is a good start and an indicator that this process will work out as soon as you implement it.
2. Spray Glass Cleaner On The Residue
Now it is time to take out the cleaning agent you are going to be using.
You will want to use a strong glass cleaner such as Windex for the task at hand. This is going to offer the type of formulation that will interact with the residue and get rid of it.
The goal of spraying the glass cleaner is to cover the residue.
Once the glass cleaner begins to interact with the residue, it will loosen up. This is key when it comes to getting rid of it.
If the residue is rigid, it will not come off regardless of what you use to scrub the surface.
When using a glass cleaner on Swiffer residue, you will want to wait at least 2-3 minutes before looking at the next step in this guide.
3. Scrub Using A Sponge
When you have waited 2-3 minutes, you are going to begin scrubbing.
Look to use a clean sponge that will ensure you can dig into the residue. The glass cleaner will have already loosened it for you.
This is a good sign.
Continue to scrub until the residue is gone. This might take a few minutes as well as a bit of effort on your part.
4. Wipe Again With A Clean Cloth
After the residue is visibly gone, you will now want to focus on what is left over.
In general, you should notice a bit of moisture from the glass cleaner sitting on the surface. You do not want to leave this as-is.
Instead, you will want to get rid of it too.
For this to happen, you will want to take a clean cloth and wipe the surface. This will ensure the moisture is gone and the surface is back to how it should be.
If you believe there is still a bit of residue left behind, go through the steps again and it will go away.
Final Thoughts
These are the steps that work as you figure out how to remove Swiffer residue.
To remove Swiffer residue, the first step is to wipe the surface using a clean cloth. Next, spray a strong glass cleaner on top, wait 2-3 minutes, and scrub using a clean sponge. The final step is to wipe the glass cleaner off using a clean cloth.
Once you go through these steps, you will notice the residue loosen and go away.
This is the beauty of using a good glass cleaner such as Windex for the task at hand. Take your time going through these steps and don’t be afraid to repeat the process if necessary.
Read More About Homes: