When your walls get dirty, it’s important to find a way to clean them.
Most people assume the only way to clean their walls is to start painting them. Yes, that is one solution but it’s not the only one.
You will want to take a look at washing the walls with Swiffer Wet.
To start washing the walls with Swiffer Wet, dust the walls using a light brush. Once dusted, take the Swiffer Wet and begin wiping the surface of the wall. It’s best to do this slowly and methodically for better results.
Using Swiffer Wet to wash your walls is the way to go.
The result is going to be clean, easy on the eyes, and good for how the wall ages.
Here is a more comprehensive guide on how to start washing walls with Swiffer Wet moving forward.
Table of Contents
Best Swiffer Wet Refills (EDITOR’S CHOICE)
No products found.
How To Start Washing Walls With Swiffer Wet
1. Dust the Surface First
Before doing anything else, you will want to prep the wall for cleaning.
It’s easy to start taking the Swiffer Wet and using it on the wall. This might work but it is also going to increase the risk of spreading dust everywhere.
Remember, Swiffer Wet is not going to get rid of the dust that’s sitting on the surface. It can cause it to spread if you are not careful.
Instead, you want to prep the surface by dusting it.
Just dusting it with a brush is going to be more than enough to clean the surface. You can then start using the Swiffer Wet as you planned to.
It’s a simple step and one that is going to matter if you want the best possible results. A lot of people skip this step and it can lead to terrible results and patchy spots that are dusty.
2. Use Swiffer Wet To Wipe The Wall
When learning how to use Swiffer Wet pads on walls, you will need to understand the importance of being thorough.
This includes starting from the top and working your way down.
This will ensure you work in small spots and continue to clean the wall properly. To get the best possible results, it’s also recommended to go in one direction.
This will ensure you don’t leave streaks on the wall when you are cleaning it.
It’s these little details that make all the difference when you are trying to wash a wall using Swiffer Wet pads.
This is noted for being one of the more effective and easy-going options when it comes to cleaning the wall.
3. Dust The Trim
Now that you are done washing the wall using Swiffer Wet, it’s time to look at the remaining elements that might have been overlooked.
This includes the trim running along the bottom of the wall.
You can often miss this part of the wall and it will continue to show signs of aging or uncleanliness.
Just take the time to start dusting this part of the wall as that will help clear out any dust that is settled on the surface.
It should take a few seconds but it will go a long way in keeping the wall looking balanced and clean.
4. Let The Wall Dry
The last step is to let the wall dry.
This is going to take a few minutes but it will have to be a part of your strategy when washing the walls with Swiffer Jet.
The reason to wait is if you are going to hang something back on the wall.
You don’t want to leave marks as that is going to be possible when the wall is still wet. Just let it dry for a bit and then put the hangings back where they belong.
For the most part, this is not going to take a long time.
Final Thoughts
These are the main steps on how to start washing walls with Swiffer Wet.
To start washing walls with Swiffer Jet, it’s important to prep the wall using a dusting brush. Dust the entire wall, wipe the surface using Swiffer Wet, and then dust the trim running at the bottom. This will clean the entire wall and have it looking brand-new again.
It’s a simple process and one that is going to have to be done with the right tool in hand.
This is why more and more people are starting to make Swiffer Wet a big part of their cleaning solution at home. It simply works.
If you want to clean the right way, you will know it is time to start here.
Read More About Homes: