When setting up a lamp shade, the components need to be compatible and the right size.
If there’s anything wrong in this regard, it can make the lamp unusable because the shade won’t go on as required.
With this in mind, you are going to wonder why the lamp shade ring is too small and what to do about it.
If the lamp shade ring is too small, the easiest solution is to replace it with the right alternative. If you wish to use the same ring, buy two washers, put one above the ring, and one under the ring to lock it into place. This should hold the lamp shade ring in place.
Remember, if the lamp shade ring continues to wobble, this is a sign you are better off going with a better alternative.
This is one of those components where the right size is important and you should avoid forcing a smaller lamp shade ring into place.
This guide will look to explain more on what to do if a lamp shade ring is too small and how to get it to fit.
Table of Contents
Best Lamp Shade (EDITOR’S CHOICE)
No products found.
Steps On How To Fix A Lamp Shade Ring That’s Too Small
1. Buy Two Compatible Washers
To get a lamp shade ring to fit, you will need to buy two compatible washers.
To do this, the first step will be to measure the base and where the ring is supposed to go. This is going to allow you to know how big the washers need to be.
If the washers are too big, the ring will continue to slide when it is in place or it won’t sit properly.
With the right type of washers, you can put them in and know they will hold.
When putting the washers in, you are going to have one above the ring and one underneath it. This will allow you to squeeze the ring in and ensure it does not budge.
2. Place Washers Above And Below The Ring
With a small lamp shade ring, you will have to place the washers correctly.
It requires understanding where the washers need to go and how to ensure they remain in place once the shade is set up.
You don’t want the lamp shade to become wobbly and that can happen when the ring is not installed correctly.
Take your time with the washers, lock them into place and then have the ring between them. This is how you are going to ensure the lamp shade ring is the right fit for your base.
3. Tighten The Ring
Once the washers and ring are in place, you are going to have to tighten the lamp shade ring.
This means twisting it and ensuring it’s pushed all the way into place.
This can take a bit of time depending on the dimensions of the base. You will want to ensure both the washers and the ring don’t budge once they are in place. This is key if the lamp shade ring is too small or too big.
You have to continue to tighten the lamp shade ring until it locks into place and you know it’s not going to cause the shade to wobble later.
4. Check To See If The Ring Wobbles
Next, you are going to see if the ring wobbles.
This means putting the shade into place and then pressing against it with your hand. Just see if the shade begins to wobble or become crooked as soon as you put pressure on it.
If it does, this means the ring is still not in place the way it needs to be.
If it does not, you are good to go and the trick worked.
Be patient and test the lamp shade to ensure it functions the way you want it to.
These are the things to do when a lamp shade ring is too small.
If a lamp shade ring is too small, the best option is to replace it with a correctly-sized ring. If not, you can use a washer above the ring and one underneath it to lock the lamp shade ring into place.
This will require you to go out and find the right type of washer for the lamp shade. This takes a bit of time on your end but will be worth the effort as soon as you are done.
When the washers are not the right size, this is going to make things worse. Be selective and measure everything to ensure the washers are a perfect fit and work the way you want them to.
Here’s More On Lamps: