The frame is supposed to act as a sturdy foundation for the rest of the bed.
If it doesn’t, the entire bed is compromised and it becomes increasingly risky to put weight on it. This includes spending your nights on the bed as it could fall at any time.
This is why it’s important to plan for this and make sure you don’t get hurt.
To get started, you will want to figure out why your bed keeps falling through the frame.
If a bed keeps falling through the frame, this means the pins holding the slats are loose and/or one of the slats has broken. To fix the issue, tighten the pins or replace the broken slat.
While slats are designed to handle quite a bit of weight, it’s possible for the pins to get compromised. This happens when you are moving the bed around.
By tightening the pins and making sure the slats are aligned, you are going to be good to go. This will also ensure the bed frame doesn’t break.
This article will figure out why your bed keeps falling through the frame and what to do about it.
Best Star Projector For Bedroom (EDITOR’S CHOICE)
No products found.
Tips To Follow If Your Bed Keeps Falling Through Frame
1. Remove The Mattress
If a bed falls through the bed frame, it’s time to remove the mattress.
You will need to see what is making the base flimsy.
In most situations, the issue is going to have to do with the initial base layer (i.e. the slats). This is where your problem is going to lie, so you will need to inspect the slats as soon as possible.
The mattress itself is not going to be an issue unless you are putting too much weight on it.
Since the average person is not going to be putting too much weight on a bed, it is likely going to come down to the frame itself.

2. Check Each Slat
Now, it is time to start inspecting the slats.
Each slat is unique, so you are going to have to go through the entire frame one slat at a time.
Look to see the pins as those are the ones that tend to loosen as time goes on. You will notice some pins are looser than others.
It is these pins that are going to have to be tightened as soon as possible. Until then, you cannot look at any other structural issue with the bed frame because it is likely the loose slats that are causing your issues.
3. Tighten The Pins
Once you have found the loose pins, it is time to start tightening them one by one.
For the most part, you are highly recommended to take the time to tighten everything associated with the bed frame.
This is a good opportunity to do a little bit of proactive maintenance work for your bed frame.
Rather than waiting for things to loosen, tighten each bed slat and also the main bed frame including the headboard.
Just go through everything and make sure they are as tight as they were when you first put it all together.
This is a good way to prevent further issues.

4. Replace Broken Slats (If Necessary)
What if you were inspecting the bed frame and realized one of the slats is damaged or broken?
In that case, you will know it is this slat that is causing all of the issues and why your bed continues to dip or fall through.
Until you fix the slat, it is not going to fix the issue.
You will want to go and take out the slat as soon as possible. Once you do this, you are going to have to move forward by changing it with a compatible bed slat and tightening the pin as much as you can.
This will ensure the bed slat is a perfect fit and works as it should.
Final Thoughts
These are the tips to apply if your bed keeps falling through the frame.
If a bed keeps falling through the bed frame, this likely means one of the slats is loose or damaged. To fix the issue, remove the mattress, check each slat’s pin, and tighten the loose ones. If broken, you will have to replace the damaged slat.
This is the only way to go about this and you will see the results you’re after.
It’s best to go through this process patiently and make sure you are looking into every aspect of the bed frame when you get the chance to do so.
Read More On Bedrooms: