How To Fix Drywall Imperfections After Priming (Step-By-Step!)

Once the primer has gone on drywall, it’s important to look for imperfections.

It’s common for most people to run checks beforehand and rightly so. You can remedy a lot of issues beforehand by having strict quality control standards but certain mistakes will go amiss.

This is why it’s important to learn how to fix drywall imperfections after priming.

To fix drywall imperfections after priming, you have to use a putty knife and scrape away the loose primer. Make sure the surface is flat and consistent end-to-end. At this point, you can apply all-purpose drywall mud over the primer. Let it dry and the drywall will look perfect.

This process can take a day to complete but will be well worth the effort by the end.

Take your time to complete each step and learn what’s required in this guide on how to repair drywall imperfections after priming.

Best Drywall Mud (EDITOR’S CHOICE)

Sale
U S GYPSUM 385140 385140004 All Purpose Joint Compound, 3.5...
  • The package length of the product is 18.29 inches
  • The package width of the product is 18.29 inches
  • The package height of the product is 19.69 inches

Last update on 2022-08-08 / Affiliate links / Images from Amazon Product Advertising API

Steps On How To Fix Drywall Imperfections After Priming

1. Scrape Away Loose Primer

Will primer hide drywall imperfections?

A coat of primer will not hide drywall imperfections. In some cases, the imperfections can heighten if the surface was not sanded and made smooth before the priming began. It’s always best to account for this beforehand.

If you have already applied a coat of primer then you will notice loose bits along the surface of the drywall.

This is common and it’s what you need to look for closely.

It is these imperfections that will make the drywall look odd. To get rid of the problem, grab a putty knife and begin scraping along these loose parts.

You will want to get them to come off before you look at reapplying drywall mud to the problem areas.

It’s important to do this safely and make sure you are confident in what you are doing. It’s a must to ensure the surface is as smooth as it needs to be.

drywall imperfections after priming

2. Smoothen The Surface Around Imperfection

Now that you have used a putty knife to remove the loose primer, it is time to look at the rest of the surface.

You can take the same putty knife and make sure all of the debris is removed. There may be bits that are sticking out and a putty knife will suffice to get rid of that debris.

Once you have done this, you will want to take a look at the rest of the surface to see if adjustments can be made.

If it is just one part of the drywall that needs to be corrected, you can move on to the next step.

3. Apply All-Purpose Drywall Mud

At this stage, you will want to apply all-purpose drywall mud.

Do not use a setting compound for this part of the process as it will not yield good results. It is important to only use all-purpose drywall mud for good results.

Once you do this, it is important to spread it properly.

You want to make sure there are no heavy or lighter areas when the all-purpose drywall mud is applied. It should be smooth and consistent from one end to the other.

drywall imperfections after priming

4. Let Mud Dry Overnight

Once you are fully satisfied with how you have removed the drywall imperfections, it is important to let the drywall mud settle.

This is going to take at least 12 hours depending on where the wall is located and what the temperature is inside the room.

Keeping this in mind, it’s better to let it sit for as long as possible without touching it. The more you wait, the better it will settle.

In most cases, you can wait overnight and see how it looks in the morning. It should be good to go and the imperfections will be a thing of the past.

Final Thoughts

These are the steps on how to repair drywall imperfections after priming.

If you want to fix drywall imperfections after priming, it’s important to start by removing the loose primer or debris. You will do this with the help of a handy putty knife. Scrape off the debris and then begin applying all-purpose drywall mud to the problem areas. Let it dry overnight and the drywall should look good.

This will take a day to do and it will be well worth the effort when done properly.

If you are careful when removing the debris using a putty knife, the drywall should look great from all angles. It is all about making sure the surface is as smooth as it needs to be.

Read More About Walls:

  1. Should Deck Screws Be Used For Drywall?
  2. How To Space Out Drywall Sheets
  3. The Right Way To Install Tiles On Drywall
  4. Is The Drywall For Ceiling The Same As Wall Drywall?
  5. Tips For Calculating Right Distance Between Floor & Drywall
  6. Tips For Fixing A Horrible Mud Job On Drywall
  7. Causes Of Drywall Mud Not Drying Properly
  8. Steps On How To Skim Coat On Drywall
  9. Guide On Using Drywall Mud Over Primer
  10. The Right Way To Use Primer For Drywall Tape