The Lazy Boy recliner is a classic fixture in homes.
It’s comfortable, fun to sit on, and simply offers an experience that is impossible to beat. You are going to fall in love with the recliner as soon as you set it up.
However, what if it doesn’t work properly? This can happen when the Lazy Boy recliner won’t stay reclined.
If the Lazy Boy recliner won’t stay reclined, the most common reason has to do with a loose or damaged spring. To fix the issue, flip the recliner upside-down, inspect the springs located on the bottom, tighten the wingnut to adjust the tension, and re-test the reclining feature.
If the reclining feature does not work, the spring might have to be replaced.
In most cases, tightening the wingnut is enough to make sure the Lazy Boy recliner works the way it should.
Don’t automatically assume you will have to replace the spring. Adjust the tension and continue to test to see whether or not that helps the reclining feature.
This article will take a look at why your Lazy Boy recliner won’t stay reclined and the steps needed to fix it.
Table of Contents
Best Power Recliner for Your Room (EDITOR’S CHOICE)
No products found.
Steps To Follow If Your Lazy Boy Recliner Won’t Stay Reclined
1. Flip The Recliner Upside-Down
If the Lazy Boy recliner won’t stay reclined, it’s time to look at what’s going on with the tension mechanism at the bottom.
This mechanism is responsible for whether or not the reclined position holds.
You will often notice damaged recliners will flop open and then they won’t recline. This is due to the tension being too loose.
A similar issue might be going on with your recliner.
In this situation, the first thing you are going to have to do is inspect the springs. To do this, you are going to flip the recliner upside-down.
This is going to give you complete access to the reclining mechanism and the two springs on the bottom.

2. Locate Two Springs On The Bottom
The Lazy Boy recliner mechanism uses two springs.
These springs are going to be located where the fixture reclines. You will immediately see them as you begin to inspect the underside of the recliner.
The goal here is to inspect each part of the spring.
You can even attempt to “open” the recliner from this position to see the reclining feature work in real-time.
This can be useful to figure out where the problem is.
Be patient when working on this and make sure you are on top of what’s going on.
3. Tighten The Wingnut
In many situations, you will realize the reason the Lazy Boy recliner won’t stay reclined has to do with the wingnut.
This is responsible for holding the spring in place.
You have to be careful when it comes to managing the wingnut. Be patient and continue to work on it as carefully as possible.
You will want to tighten it as that is going to help initiate the reclining movement that is not working as of right now.
As you tighten it, the reclining mechanism will work.
The only time it will not work is if the spring has become completely damaged.

4. Re-Test The Reclining Feature
Now, you are going to have to re-test the reclining feature.
This is a common mistake that is made by people and it leads to unwanted results. You have to re-test the reclining feature to make sure it works both when the recliner is upside-down and when it is in its required position.
Test it in these positions to make sure the recliner is not going to stop working randomly when someone sits down.
If it is opening somewhat, it might be time to further adjust the wingnut by flipping the recliner upside-down again.
5. Replace The Spring (If Necessary)
The damage might be too extensive.
This happens and it is something you will have to be mentally prepared for. If this is the case, tightening the wingnut is not going to help.
What is the next best solution then?
The only way to fix the recliner is to replace the spring. You will have to find a replacement part through the official website to make sure it is a perfect fit.
Final Thoughts
Follow these steps if your Lazy Boy recliner won’t stay reclined.
If a Lazy Boy recliner won’t stay reclined, the main reason has to do with a loose or damaged spring. To fix this issue, flip the recliner upside-down, assess the two springs on the bottom, tighten the wingnut, and re-test the recliner.
This should help fix the issue.
If it still doesn’t work, you will have to replace the spring with a compatible replacement part.
Read More On Living Rooms:
- Should You Use Extension Cord Safe For Recliners?
- Why Is The Back Of Recliner Falling?
- Should Power Recliners Always Be Plugged In?
- How To Fix Recliner Stuck In Open Position
- Can Power Recliner Be Used Manually?
- How To Set Up A Recliner Against The Wall
- How To Buy A Good Eames Chair
- How To Set Up Sofa Cushions For Fluffing
- How To Push A Sofa Through A Narrow Doorway