Why Your Kitchen Faucet Spout Came Off (How To Fix)

If a kitchen faucet won’t stay in place, it’s important to look at what the root cause is.

In some cases, the situation might become dire. This happens when the kitchen spout came off and it’s resting loosely to the side.

If that is true in your situation then it’s time to figure out why the kitchen faucet spout came off.

A kitchen faucet spout that came off likely has a damaged O ring or mounting nut. To fix this, shut off the water valve, unscrew the spout, and replace the O ring. It’s important to also check the mounting nuts under the sink holding the faucet in place. These might have to be tightened or replaced to fix the problem.

For the most part, this is a common problem with older kitchen faucets.

Don’t panic and make sure you are choosing the right O ring or mounting nut for your faucet. If you do this, it will be an easy fix that should be done within 10 minutes or so.

This guide will go into detail explaining what you have to do if a kitchen faucet spout fell off.

Best O Ring Kit For Kitchen Spout (EDITOR’S CHOICE)

Last update on 2024-04-14 / Affiliate links / Images from Amazon Product Advertising API

How To Fix A Kitchen Faucet That Came Off

1. Shut Off The Water

Before doing anything, you will want to shut off the water supply to the faucet.

You don’t want water spilling all over the place and making a mess when you pull out the spout. As a result, it’s safer to shut off the water supply right away.

When doing this, make sure to let the water run for a bit.

This will drain water that is present inside the faucet or spout. If not, it will start leaking as soon as you pull it out!

2. Locate the O Ring

You will now locate the O ring.

This is going to be holding the spout into the fixture and it’s a critical component in making sure the spout does not leak.

If this is loose or damaged, several issues pop up including the kitchen faucet spout coming off.

When you unscrew the kitchen faucet, you will gain access to the O ring. Inspect it and see whether or not it’s structurally sound.

In most cases, it will be loose or broken down.

Replace the O ring using the kit listed above. You can watch the video below to get a visual representation of what you need to do when replacing an O ring.

Do it patiently and make sure to tighten it as much as possible. You don’t want water leaking all over the place once you’re done.

3. Check the Mounting Nuts

Before checking to see if the kitchen faucet spout moves, please also take the time to look at the mounting nuts.

In some cases, it might not be the O ring that is the issue. Instead, it’s going to be the mounting nuts running under the sink.

These are designed to hold the faucet in place and can cause everything to come loose including the spout depending on the model you’ve installed.

4. Re-Test The Faucet

If you feel the faucet is tightly in place and the spout is not moving, it’s time to turn on the water supply again.

Now, you are going to re-test the faucet to see if it works.

You should not hear a hissing noise from the faucet when it’s on nor should it move around. Tug at the spout to see if it spins or falls.

If not, you are good to go and the problem is resolved.

If it does move then it’s best to turn off the water supply again and re-tighten the O ring or mounting nuts.

How Do I Stabilize My Kitchen Faucet?

To stabilize a kitchen faucet, apply plumbers putty underneath the faucet. This will help hold the faucet in place and secure its spot on the sink. It’s also recommended to check on the mounting nuts located under the sink. These are responsible for holding the faucet inside the sink and might have to be tightened.

Final Thoughts

These are the steps to follow if a kitchen faucet spout came off.

If a kitchen faucet spout came off, the likely issue has to do with a loose or damaged O ring. To replace the O ring, shut off the main water supply, unscrew the spout, and inspect the O ring. If it’s damaged, replace the O ring with a new one. In some cases, the mounting nuts under the sink can be an issue too. Inspect those and tighten them before testing the faucet.

This is a simple way to make sure the kitchen faucet spout doesn’t keep falling off.

Read More On Kitchens:

  1. What Causes Faucet To Always Spin?
  2. What’s Required To Remove Faucet Easily?
  3. Reasons Water Is Cloudy From One Faucet
  4. Why Is Pull-Down Kitchen Faucet Not Retracting?
  5. What is a Ceramic Disc Faucet All About?
  6. Why Does Water Not Flow From My Faucet?