No Water In Shower But Sinks Are Fine! (Step-By-Step Solution!)

Is the shower not turning on in your bathroom?

It’s common for plumbing issues to arise when using the shower. This can include specific fixtures inside the bathroom not functioning as expected.

A problem that does pop up involves no water in the shower but the sinks are fine.

If there is no water coming in the shower but the sinks are fine, it’s likely an issue with the showerhead. There might be a blockage inside the showerhead or the cartridge has gone bad. Take off the showerhead and re-test the water to see if it comes through. If it does, replace the cartridge and it will be good to go.

It’s important to note, if the water does not come through, the issue has to do with the pipes. This is a much bigger job and might involve work inside the pipes to determine where the blockage is.

This article will explain how to deal with no water in the shower but the sinks are fine. Here are a few steps to follow when the shower’s water isn’t coming.

Best Showerhead (EDITOR’S CHOICE)

No products found.

Steps On How To Fix Shower When Water Isn’t Coming

1. Remove the Showerhead

If there is no water pressure in the shower but plenty everywhere else, this means the issue is likely inside the showerhead.

You will want to turn your focus towards this part of the fixture.

Before doing anything else, remove the showerhead.

You will want to do this carefully and make sure to turn off the water before doing so. This will ensure water doesn’t spurt out at you as soon as the showerhead comes off.

Remember, you will have to re-install the showerhead if you are not buying a new one. This is why damaging it can lead to cracks along the side and unwanted leaks.

2. Turn the Water On

Now you will turn the water on without the showerhead.

If the shower is not getting hot water but the sink is, you will want to determine what the root cause is. It can only be figured out when you turn the water on safely.

Make sure the shower door is closed when doing so. If you have a curtain, the same applies. You will want to protect the water from spurting out into the rest of the bathroom.

By turning on the water, you will know whether or not the issue is in the showerhead.

No water coming out of the bathtub faucet likely means a deeper issue. However, if water does come out then it is the showerhead that’s giving you serious trouble.

You will then know it is the showerhead that has to be repaired or replaced.

no water in shower but sinks are fine

3. Replace the Cartridge

If the shower is not working and there’s no water then you will want to replace the cartridge.

This can get dirty and ruined as time goes on. If there is breakage, you are going to have to pay the price in the form of a damaged cartridge.

Be careful and replace the cartridge before re-installing the showerhead.

4. Re-Install the Showerhead

When there is no water in the shower, it’s essential to re-install the showerhead carefully.

You will want to make sure it is snug against the pipe and is not going to have leaks where the seal is.

Tighten it properly and then move on to the next step.

The same applies if there is no water coming out of a new showerhead.

no water in shower but sinks are fine

5. Test the Water Again

Now you are going to test the water.

If water comes out, you are good to go and the issue likely had to do with the cartridge or how the showerhead was installed.

However, what happens if the shower still isn’t working?

You will now have to replace the showerhead or call a plumber. They will test the pipes to see whether or not the blockage is stemming from somewhere else.

Final Thoughts

These are the steps to follow when there is no water in the shower but the sinks are fine.

If there is no water in the shower but the sinks are fine, it’s likely the showerhead is causing issues. This can involve a blockage or damaged cartridge. Remove the showerhead, test the water again, and see whether or not it comes through. If it does, replace the cartridge and re-install the showerhead tightly. This should get the shower working again.

Be patient through each step to make sure it lasts for a long time and doesn’t disappoint.

Read More On Bathrooms:

  1. Reasons Tub Spout Is Leaking In Shower
  2. Why Is There Water Under A Bathroom Sink?
  3. Why Does Shower Keep Running?
  4. Main Reasons Water Doesn’t Come Out From Showerhead
  5. Tips For Cleaning Showerhead
  6. Can Showerheads Be Universal?
  7. How To Set Up Drain In Shower
  8. Why Is My Shower Hot Even On Colder Setting?
  9. Reasons To Not Plunge A Shower Drain
  10. Reasons For Installing Ceramic Tiles In Showers