Guide On Replacing Gas Fireplace Logs With Stones -

When learning how to make a gas fireplace look better, you are going to come across a wide array of decorative options.

Some are going to look good while others will disappoint.

It’s a subjective topic and one you have to go into detail about choosing the right fit for your specific fireplace. This includes thinking about replacing gas fireplace logs with stones.

To start replacing gas fireplace logs with stones, remove the front glass, turn off the gas supply, unscrew the logs and burner, clean underneath to remove soot, and add in the new rocks. For the new rocks, set them on the floor approximately 4 inches away from the glass and 2 inches deep.

This is something you should measure as it will impact performance over the long term when the gas fireplace is turned on.

Using decorative stones in a gas fireplace is a wonderful idea.

This guide will demonstrate how to go about replacing gas fireplace logs with stones at home.

Table of Contents

Best Stones For Fireplace (EDITOR’S CHOICE)

No products found.

How To Start Replacing Gas Fireplace Logs With Stones

1. Turn Off The Gas Supply

When you remove the front glass, it’s important to make sure the gas is turned off.

You don’t want the flame to be turned on at any point when working with the gas fireplace logs. It’s best to take a step back, turn off the gas line, and go from there.

This will ensure any change that is made to the gas fireplace will be done safely. Don’t rush the process.

There will be a valve running along the bottom of the front panel. This is where the gas valve can be turned on or off. Set it to “off” and make sure nothing is flowing through the gas line.

replacing gas fireplace logs with stones

2. Unscrew & Remove The Logs

To start using a gas fireplace without logs, you will need to take them out.

To do this, you will have to unscrew the logs and burner that are set along the bottom of the gas fireplace.

Access these logs and take them out.

They should come out easily once you find how they are connected to the base of the gas fireplace.

When you are doing this, it’s important to keep the screws on hand. You might need them later on. This includes any connector that was used for the fireplace glass.

3. Clean The Soot Underneath

A lot of people don’t do this when they are working on adding stones to a fireplace.

Stones in a gas fireplace are gorgeous and something you are going to want to invest in. However, you also have to prep the gas fireplace to make sure it’s in good condition for years to come.

This is a part of maintenance for parts of the gas fireplace that are harder to reach such as the floor.

To do this, just wipe away the soot that is present underneath the logs. Once you take them out, you will have complete access to that part of the gas fireplace.

Be methodical and use a fireplace cleaner if you have to.

4. Spread Stones On The Floor Of Fireplace

To replace fireplace logs with stones, you will need to set them in place properly.

For this to happen, start by measuring two parts of the gas fireplace – depth and distance from the glass.

You want to have the stones starting 4 inches away from the glass. Don’t set them right up against the glass as that is dangerous.

You will also want to have the stones at least two inches deep. This will offer enough stones for more comprehensive coverage.

Can I Put Rocks In My Gas Fireplace?

You can put rocks in a gas fireplace and it’s a common decorative option used by property owners. It accentuates the fireplace’s natural elegance and will look far more unique than traditional logs.

Final Thoughts

These are the most important steps for replacing gas fireplace logs with stones.

To start replacing gas fireplace logs with stones, turn off the gas supply, remove the front grille, unscrew the logs and burner, clean the soot found underneath, and make sure to add the stones four inches away from the glass.

This will create the perfect look that is in line with your vision for the gas fireplace.

Stones in a gas fireplace are beautiful and will add value. Just makes sure they are set up with the right measurements (4 inches from the glass and 2 inches deep).

This is to ensure the results are on par with what you want for the heating fixture.

Read More On Living Rooms: