Lava lamp wax is supposed to be one functional substance for it to work properly.
Unfortunately, external conditions and/or internal components can play a role in separating the lava lamp wax.
This can leave you wondering what’s going on and how to fix lava lamp wax that’s separated.
To fix the lava lamp wax that’s separated, aim a hairdryer at the bottom of the lava lamp. Run it for 5 minutes on the highest setting. Now, let the lava lamp sit for 30 minutes. This will cool off the wax before you use the hairdryer again for 5 minutes. Repeat this process until the lava lamp wax bubbles and joins together.
This is a simple solution and will work well.
The reason lava lamp wax separates comes down to the internal temperature. This causes the wax to lose its shape and separate into pieces.
By using a hairdryer or any other heat source, you will help join the lava lamp wax together as it’s supposed to be.
Here is a look at what to do in greater detail for those dealing with separated lava lamp wax.
Best Globe Lava Lamp (EDITOR’S CHOICE)
No products found.
How To Fix Lava Lamp Wax That’s Separated
1. Increase the Temperature Using Hairdryer
The first step is to increase the temperature inside the lava lamp.
To do this, you are going to use a hairdryer.
It’s also okay to use other heat sources that are available to you. It can even be something as simple as putting a heavy blanket on top of the lava lamp for 5-10 minutes.
In this example, you are going to use a good hairdryer to heat the bottom of your lava lamp. Remember, you have to point it to the bottom of the lava lamp.
This will ensure that the heat causes the lava lamp wax to rise and join together with anything higher in the lamp.
2. Let Lava Lamp Sit For 30 Minutes
Once you have used the hairdryer for approximately 5-10 minutes, it’s time to let the lava lamp cool off for a bit.
This should be at least 30 minutes to an hour.
You want to ensure the surface of the lava lamp is cooler than it was before. This also ensures you don’t have a situation where the lava lamp starts breaking down on you because too much heat was applied in one go.
Just let it cool off and then see what happens next.
At this point, you will notice some of the lava lamp wax start to rise.
3. Run Hairdryer Again For 5 Minutes
If you notice the lava lamp wax rise, this means you are making a difference with your solution.
It is time to kick things up a gear.
You are going to run the hairdryer again targeting the bottom of the lava lamp. This is going to once again cause the heat to push the lava lamp wax up.
At this point, it is going to be bubbling even more because it was already warm. You want to get it to the point where more and more wax starts rising inside the lava lamp together.
4. Continue Process Until Wax is Fixed
The last step is to make sure you are paying attention to how the lava lamp wax is doing.
Continue to go through the steps listed above.
This means turning the hairdryer on for 5 minutes and then waiting for 30 minutes. It should work after a few hours.
If it does not work, simply increase the amount of time you run the hairdryer. There will come a time when the heat is going to be more than enough to cause the lava lamp wax to rise as you want it to.
Just stay patient and continue to apply heat to the bottom of the lava lamp.
Final Thoughts
These are the steps to follow if the lava lamp wax is separated.
If the lava lamp wax has separated, it’s important to apply heat to the bottom of the lamp. To do this, you are going to use a hairdryer and aim it at the bottom. Do this for five minutes and then let the lava lamp cool off for 30 minutes. Continue to repeat this process until the lava lamp wax starts to rise and joins together.
It will take a bit of time to do this but the results are going to come the way you want them to.
This is essential when it comes to avoiding a situation where you are cutting corners or not seeing results at all.
Read More About Lava Lamps: